EHU-01/05/08

Based on CAN BUS for the communication connection.
The built-in 1/5/8 loop alarm trigger input port can be connected to the input signal of the external emergency switch, and a reset input port can be reset when an alarm occurs.
The input port signal has anti-bounce function.
Alarm trigger, reset input or alarm output relay action will generate events and return to the main controller.
When the alarm is triggered, the alarm relay is activated at the same time, and the alarm can be cancelled by the reset input port or by the remote command.
The point number (ID) can be set via the DIP switch.
Supports power reverse connection protection (Fool-proof

Based on CAN BUS for the communication connection.
The built-in 1/5/8 loop alarm trigger input port can be connected to the input signal of the external emergency switch, and a reset input port can be reset when an alarm occurs.
The input port signal has anti-bounce function.
Alarm trigger, reset input or alarm output relay action will generate events and return to the main controller.
When the alarm is triggered, the alarm relay is activated at the same time, and the alarm can be cancelled by the reset input port or by the remote command.

Model No.	HU-01	EHU-05	EHU-08
RF Band	32 Bit (supports ISP)
Input Ports	Triggered x1, Reset x1	Triggered x 5, Reset x1	Triggered x 8, Reset x1
Output Ports	Alarm Relay × 1 (Jumper can be used to adjust NO/NC or DC voltage output), O.C. × 2
LED Indicator	Power/Status (R/G) x 1, Comm (R/G), Input x 1
Comm.Interface	CAN x 1
Comm. Baudrate	CAN：20K bps
ID Setting	6 digits, DIP-SW	10 digits, DIP-SW	10 digits, DIP-SW
Power Input	DC 10V~26V	DC 10V~26V	DC 10V~26V
Current Consumption	500mA	500mA	500mA
Operating Temp.	-40˚C ~ 70˚C	-40˚C ~ 70˚C	-40˚C ~ 70˚C
Relative Humidity	20% ~ 80% (Non-condensing)
Dimension (mm)	105 (L) x 62 (W) x 27 (H)	150 (L) x 100 (W) x 30 (H)	150 (L) x 100 (W) x 30 (H)

Type

Name

Format

Downloads

Brochure

EHU-01/05/08 Loop Trigger Unit

PDF