RAC-960PE-V/PM-V PoE

  • On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
  • Bell key design. Suit for various location.
  • Standalone operation & setting function
  • Support swipe card and swipe card with pin codes enter modes.
  • The memory of the standard model is 40,000 cardholders (max) and 100,000 events.
  • Casing tamper proof detection and door tampers alarm.
  • Slim, stylish design with waterproof sensitive touch keypad with blue backlight.

Features

  • On-board lithium battery ensures data storage can reach up to 1 year upon power outage.
  • Bell key design. Suit for various location.
  • Standalone operation & setting function
  • Support swipe card and swipe card with pin codes enter modes.
  • The memory of the standard model is 40,000 cardholders (max) and 100,000 events.
  • Casing tamper proof detection and door tampers alarm.
  • Slim, stylish design with waterproof sensitive touch keypad with blue backlight.
  • Provide 128 time zones and time schedules, 8 time conditional unlock door schedules. (per week)
  • Built-in RS-485 and TCP / IP communication interface to PC.
  • Supports PoE (Power Over Ethernet); The controller can be powered directly through the network cable without any external power supply.
  • Display name on the LCD screen after swiped card.
  • Memory buffer full warning. When memory capacity reaches 90%, it will make a warning sound to alert the system administrator for data collection.
  • Blacklist and Duress card/code setting. When door opened in the emergency, the controller will send signal to control center at the same time for tracing and rescue.
  • Programmable disarm code and able set maximum attempts to trigger re-swipe card alarm. The controller time-out function will avoid intrusion in and has self security.
  • Provide 32 working shifts and 32 siren output. LCD will display current shift and activate alarm. Provide 100 holiday schedules per year.
  • Able to connect external slave reader and support Anti-Passback to every single door.
  • IP65 rated ingress protection.
  • Conforms to ISO 14443A standard; supporting Mifare card; Unique ID or Block read format supported. (RAC-960PM-V)

Specification

Model No.

RAC-960PE-V

RAC-960PM-V

CPU

32 Bit (Supports ISP)

Read Format

EM (125 KHz )

Mifare (13.56MHz )

Read Range

6~8 cm

3~5 cm

Slave Reader

T2 or Wiegand ( 1 Set )

Input Ports

3 Sensors (Door Sensor x 1、Exit Button x 1、Case Sensor x 1)

Output Ports

Relay x 1;O.C. Output x 2 (Door Lock / Alarm or Siren,
external ACU-30)

Cardholders

40,000

Events

100,000

LED Indicator

Red/Green Bi-Color LED x 2 (Power/Comm./Status)

LCD Display

128 x 64 Dot. Graphic Display with backlight

Keypad

17 Key (F1-F4, 0-9, *, #, Bell) (Sensitive Touch Keypad)

Real Time Clock

Yes

Beep Tone

Buzzer

ID or IP Setting

Command setting by keypad

Ingress Protection

IP 65

Memory Battery

3V Lithium Battery (Replaceable)

Power Input

DC 12V / 500mA; PoE

Current Consumption

500mA (max.)

Comm. Interface

RS-485 / TCP/IP

Comm. Baudrate

RS-485:9,600/19,200 bps-N-8-1, TCP/IP:10/100 Mbps

Operating Temp.

0° C ~ 55° C / 32° F ~ 131° F

Relative Humidity

20% ~ 80%(Non-condensing)

Dimension

130mm(L) x 100mm(W) x 27mm(H)

Related Products

Downloads

Type
Name
Format
Downloads
Brochure
RAC-960PE-V/PM-V PoE Standalone Access Controller
PDF
Cart

Login

Login Success